Packaging - Forbo Advantage 89056 hot melt adhesive comes in wafers in 25 lb boxes or 50 lb boxes.

Storage - This hot melt can be stored for up to 1 year in a cool, dry place in the original container.

Clean Up - First drain as much molten material as possible from the line.  Then flush the unit with paraffin or triethylene glycol or a product that is recommended by the equipment manufacturer.

Important Safety Information - FDA Status:  This product compositionally meets the requirements of Section 175.105 of 21 CFR.  For further information and applicable limitations of use, please contact our Environmental, Health and Safety Team at 1-919-433-1300.

Before using this or any other chemical product, be sure to read and understand the information on the MSDS and Product Labels.  Remain aware of potential hazards and follow all precautionary measures, handling instructions, and disposal considerations outlined in the MSDS and labels.

• Wear heat resistant gloves and face protection when handling hot melt adhesives.
• Avoid contact with melted product.  Bodily contact can cause serious burns.
• If contact with hot product does occur: a) Cool immediately by immersion in cold clean water, b) Do not attempt to remove the cooled adhesive from the skin, c) Cover contacted area with clean, wet compresses and get emergency treatment immediately.

For help in a Chemical Emergency, call CHEMTREC at 1-800-424-9300.

Use Precaution - Product is ready to use as received; do not dilute hot melt adhesive.  Confirm compatibility before making hot melt adhesive changes.  Keep covered to prevent contamination.  Use adequate ventilation.
Technical Support - Forbo Adhesives' technical support staff has extensive practical experience with adhesives and manufacturing techniques.  Please do not hesitate to request  assistance through Clute Packaging Systems.

Click here for MSDS Sheets for 89056 Hot Melt Adhesive